Two water supplying ways with a hydrator A hydrator is used for wetting the grain with water during feeding process. It As the gain is mixed with hot water during feeding process, the mash actually already starts from thi...
How does CO2 affect the beer quality During beer maturation, many brewmaster would prefer to fill CO2 into beer to make CO2 reach a saturated condition. Why do we need to fill CO2? How does CO2 affect the beer quality? Fi...
Secondary Fermentation 1.The secondary fermentation temperature is generally maintained at 3-5 degrees, allowing the remaining fermentable sugars (mainly maltose and maltotriose) could continue to ferment, and produce CO2...
Mashing method -----infusion mashing method The malts mashing method mainly has two:infusion brewing method and decoction brewing method. Infusion mashing method Its characteristic is that,mash wort no need to go though b...
The beer fermentation operation process 1.Inspection: The accessories, valves, gauge and glycol, 02 supply is normal. If it is OK, preparing add the material. 2.Rinsing: four steps 1)Water:Cleaning the tanks for 15 minute...
Calandria for Brew Kettle Most large volume brewery use the Calandria for KTW boiling. The Calandria is set vertically in the brew kettle, when boiling the wort, it go trough the Calandria to be heated. For better control...
Which boiling venting device more suitable for the building? A suitable venting device will help to decrease the foggy condition in brew house. Direct venting: A direct venting tube will vent the boiling steam outside the...
Mashing overview What is Mashing process?Maybe you are a little puzzling about it.Now let me give some simple introduction about it in the article. As you know,there are various hydrolase in the malts.It can utilize these...
Want to start your own brewery now. Just send your idea by email.
